Wire mesh and weld constructions
Through years of cooperation with Mr. Lazaretto, we have taken over the representation of RopReti srl for southern Germany.
Ni-Cr materials are mainly used for the wire mesh in heat treatment.
A wide variety of shapes can be made from different materials. Welded constructions made of Ni-Cr materials can also be made.
 | The mesh / wire combinations can be freely selected for the different weaves. The wire diameter can vary from 0.25mm to 8.00mm and the mesh size ranges from 0.30 x 0.30 to 50 x 50 mm. Various standard shapes can be produced. The type of weave is primarily determined by the type of pre-cranking. The standard weaves are described in ISO 4783/3. |
Form A = double cranked |  |
Form B = fabric with intermediate corrugation |  |
Form C = grid with intermediate corrugations |  |
Form D = grid, cranked on both sides |  |
Form E = grid, smooth on one side |  |
Pressure welded grid = pressure welded |  |